BLOGS

Specification of BE 1000 series
Posted By : Admin
Date : 2019-05-03
0 comments

According to the IS 8887, Emulsion are classified into five types such as RS-1, RS-2, MS, SS-1 and SS-2 depending upon their setting characteristics:   S.No. Properties of Bitumen Emulsion Grade of Emulsion (Softer Grade) Test Method RS-1 RS-2 MS SS-1 SS-2 1 Residue on 600 micron IS sieve (% mass). Max. 0.05 0.05 0.05 0.05 0.05 IS:8887 2 Viscosity by Say bolt

Types of Micro Surfacing
Posted By : Admin
Date : 2019-05-02
0 comments

The type of microsurfacing that can be used for each of the application, quantity of microsurfacing mix and the residual binder content in each type is provided on below table:   Items Type II (4 to 6 mm)** Type III (6 to 8 mm)** Application For roads in urban and rural areas, residential streets, as preventive andrenewal treatment. (<1500 CVPD) For primary and inter-state routes, highways and runways to give maximum skid resistance,

Application of Laying of PatchEzee
Posted By : Admin
Date : 2018-10-10
0 comments

PatchEzee™ Set-in-Wet for potholes upto 50mm. The standard process for application of PatchEzee™ Set-in-Wet is: Remove any loose material from the pothole. Pour out the PatchEzee™ Set-in-Wet for Wearing Course for layer 1 and compact. Pour out the PatchEzee™ Set-in-Wet for Wearing Course for layer 2 and compact with a slight overfill (convex shape). Sprinkle stone dust on patch. Allow Traffic.   However, if potholes of greater than 50mm upto

Copyright© 2018 All Rights Reserved A R Thermosets Pvt. Ltd.
Designed By eQuinoxx Design Studio