BLOGS

IIT
Posted By : Admin
Date : 2020-02-05
IIT LAB
Types of Micro Surfacing
Posted By : Admin
Date : 2019-12-16
The type of microsurfacing that can be used for each of the application, quantity of microsurfacing mix and the residual binder content in each type is provided on below table: Items Type II (4 to 6 mm)** Type III (6 to 8 mm)** Application For roads in urban and rural areas, residential streets, as preventive andrenewal treatment. (<1500 CVPD) For primary and inter-state routes, highways and runways to give maximum skid resistance,
Specification of BE 1000 series
Posted By : Admin
Date : 2019-12-16
According to the IS 8887, Emulsion are classified into five types such as RS-1, RS-2, MS, SS-1 and SS-2 depending upon their setting characteristics: S.No. Properties of Bitumen Emulsion Grade of Emulsion (Softer Grade) Test Method RS-1 RS-2 MS SS-1 SS-2 1 Residue on 600 micron IS sieve (% mass). Max. 0.05 0.05 0.05 0.05 0.05 IS:8887 2 Viscosity by Say bolt
What are Bitumen Emulsions
Posted By : Admin
Date : 2019-12-16
Application conditions usually require bitumen to behave as a mobile liquid. Therefore, it becomes imperative that bitumen, which is a highly viscous substance, is converted into a low-viscosity liquid (able to flow freely). There are three ways to make bitumen less viscous: Heat it at high temperatures, >120 deg.C., Dissolve it in Solvents like Kerosene or Diesel, however, this process is not environmentally friendly, Emulsify it. We are interested

Copyright© 2020 All Rights Reserved A R Thermosets Pvt. Ltd .